System Setup (cont’d)
25
ICON ACTION NOTES
4. If authority levels are correct, press BACK
or Home to exit the menu.
5. If changes are necessary, select the line to
be changed and the level of user to have
access; then press Apply.
The Screen Security screen is re-displayed listing
any changes.
Note: The User Levels listed on this screen match
the User Levels in commercial panels. See the
following chart for corresponding User Levels in
Residential Panels
.
Residential Panels and Screen Security
Authority Level in Panel
Matching
Authority
Level in
Keypad
Access Level Chosen in Keypad Screen Security
Installer
Master
Manager
Operator A
Operator B
Operator C
System Master Master No Yes Yes Yes Yes Yes
Partition Master Master No Yes Yes Yes Yes Yes
Standard User Normal No No No Yes Yes Yes
Arm Only N/A No No No No No No
Guest Guest No No No No Yes Yes
Duress N/A No No No No No No
Code Authority
The Code Authority screen displays User Names and Partition Authority Level for the User Code. To
view the Code Authority level, do the following:
ICON ACTION NOTES
1. Press the Code Authority icon.
2. Enter the 4-digit User Code for the user
that you want to obtain Authority Level
information about. Press BACK.
Note: If the User Code entered is not active in the
system, an “INVALID” message will be displayed.
Device Events
Your keypad has the ability to record events in a history log. Each event is recorded with the time and
date of its occurrence. To view the Device Events, perform the following:
ICON ACTION NOTES
1. Press the Device Events icon. A list of
events is displayed.
To view a record of events in a history log, slide the
scroll bar down. The Date, Time and Description of
each event is displayed.
Panel Configuration
The Panel Configuration screen displays the configuration of the panel. To view the panel
configuration, do the following:
SCREEN
ACTION NOTES
1. Press the Panel Configuration
icon.
2. If correct, press Back to return to
“System Setup” screen.
A "Panel Configuration" screen is displayed providing details
of your system.
Delete clears the configuration from the keypad and reloads
the panel configuration into the keypad from the panel.
After you press Delete, a confirmation screen is displayed.
To Next Page
Loading...
