Honeywell Tuxedo Touch WIFI - Software Upgrades; System Information

About the System (cont’d)
6
Maximum Number of
Keypads
Minimum Software Revision
Level
Alarm System
VISTA-20P, FA168CPS 4 5.0
* VISTA-21IP 4 1.0
VISTA-128BP, VISTA-250BP 3 4.4
VISTA-128BPEN 3 7.0
VISTA-128FBP, VISTA-250FBP,
FA1670C
3 4.1
VISTA-128FBPN 3 5.1
VISTA-128BPT, VISTA-250BPT,
VISTA-128BPTSIA, FA1660CT
6 10.1
FA1660C, FA1700C 3 3.0
* Not evaluated by UL.
Note: Keypad may only be used in the following UL/cUL installations: UL 365, UL609, UL 985, UL1023,
UL 1610, CAN/ULC-S303, CAN/ULC-S304, ULC-S545, ULC/ORD-C1023, and ANSI/SIA CP-01-2010.
To obtain the software revision level on commercial panels:
• From program mode, enter #92 on the keypad (this can be done from the Console Mode). The
second line of the keypad displays the software revision level (w/out the decimal point).
To obtain the software revision level on residential panels:
• From the Home Screen press Setup/System Setup/Central Station Setup/ enter installer code/
press the panel configuration icon; the software revision level is displayed.
• The keypad sound suppression feature available in some commercial panels is not compatible
with the Tuxedo Touch WIFI keypad.
• The ‘Voice Chime’ feature is a residential control feature only.
Note: If using the maximum number of keypads, an additional auxiliary power supply may be needed. Refer
to the “Wiring” and “Specifications” section for more information.
Software Upgrades
Software upgrades may be available for this product. To ensure you have the latest version, check the
version in your system, (see System Information below) then log in to MyWebTech and enter TUXW in
the “Search by” “My Product” field; press Go. Click on “Tuxedo Touch software update SBS” and follow
the instructions to download the latest upgrade, if necessary. For more information, visit the Tuxedo
Toolkit site located at: http://www.tuxedotouchtoolkit.com/index.html
.
System Information
To view the current software version installed on your system, and verify connectivity, do the following:
ICON ACTION NOTES
1. From the "Home" screen, press the Setup
icon.
2. Press the System Info icon.
The Interface Name, Host Name, MAC Address,
CRC, IP Address, Broadcast Address, and
NetMask are also displayed.