User System Setup (cont’d)
32
ICON ACTION NOTES
1. Press the System Setup and Advanced
Setup icon.
2. Enter your Authorized Code, if required.
3. Press the Output Setup icon.
4. Select the outputs to display or not
display on the Output screen and press
Apply.
This is a local setting for the graphic keypad. If
user has the maximum number of keypads on
the system, and wants to disable the same
output for all, each keypad needs to be set
individually.
A confirmation window is displayed stating:
“Information Settings saved”
Press OK to save the setting
Apply
OK
Back
Home
If the Back icon is pressed, a confirmation window appears
stating:
“Output Settings changed. Do you want to save new
settings?” Select Yes or No.
To Next Page
Loading...
