D-1
A P P E N D I X D
Contact ID Codes
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
TABLE OF CONTACT ID CODES
RF Transmitter Low Battery
Access Point Relay/Trigger Fail
Access Point DSM Shunt/Unshunt
Exception Schedule Change
NOTE: If there is a phone line (or radio) failure and the
panel has exhausted its maximum attempts to send
reporting events to the central station, the panel will
hold the messages in a buffer and resend upon restoral
of the communication path. In addition, old messages
that are sent will indicate that they are not current
messages so that the central station does not dispatch
on them. In order to accomplish this, an event qualifier
of “6” will be sent in place of the “1” or “3” character in
the message. The “6” indicates that the message is old.
Events will be sent in chronological order and will be
time-stamped in the system’s event log
Event Log Alpha Descriptors
FIRE Fire Alarm
DURESS Duress Alarm
PANIC Silent or Audible Panic Alarm
BURGLARY Burglary Alarm
EXP SHRT Polling Loop Short
RF EXPND Expander Module Failure
AUXILIARY Non-burglary Alarm
TROUBLE Trouble
AC LOSS AC Loss
LOW BATTERY System Low Battery
SYSTEM RESET System Reset
PROG CHANGE Program Change
BATTERY FAIL System Battery Failure
RF SUPR RF Supervision
RPM SUPR RPM Supervision
RF LBAT
RF Low Battery
EXP TRBL Expander Module Trouble
To Next Page
Loading...
