Honeywell Vocollect Talkman A700 - Page 68

DescriptionDefault ValueRegistry Key
Enables Vesta algorithm decoding for better read range.0x1Code39ReadingRange
A single character inserted before the barcode data to
indicate the symbology.
0x2aCode39CodeMark
Enables various check digit calculations, where 0 =
disabled, 1 = modulo 43, 2 = French CIP, 3 = Italian CPI,
4 = HIBC, and 5 = AIAG.
0x0Code39CheckDigitVerification
Tolerance for reading "hard to read" barcodes, where 0 =
high, 1 = medium, and 2 = low.
0x0Code39ReadingTolerance
Length value L1. Range is 0x0 to 0xFF (0 to 255).0x0Code39BarCodeLengthL1
Length value L1. Range is 0x0 to 0xFF (0 to 255).0x0Code39BarCodeLengthL2
Length value L1. Range is 0x0 to 0xFF (0 to 255).0x0Code39BarCodeLengthL3
Length verification mode, where 0 = "L1 is min length", 1 =
"L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is max
length".
0x0Code39BarCodeLengthMode
Enable transmission of the check digit.0x0Code39CheckDigitTransmission
Enables transmission of start/stop characters.0x0Code39StartStopTransmission
Selects start character, where 1 = '$', 2 = '*', and 3 = '$' and
'*'.
0x2Code39AcceptedStartCharacter
Enables extended character set through the use of control
characters, where 0 = disabled and 1 = enabled (extended
spec).
0x0Code39FullASCIIConversion
User-defined symbology identifier. Range is 0-4 characters."B1"Code39UDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Code 128] - Code 128 Symbology Configuration
Enables the standard Code 128 symbology.0x1Code128Activation
Enables the International Society of Blood Transfusion's
variant of Code 128.
0x0ISBT128Activation
Enables the GS1 (formerly EAN) variant of Code 128.0x1GS1-128Activation
Unconventional decoding mode bitfield, where bit 0 = allow
decode of double FNC1, bit 1 = FNC2 append disabled, bit
2 = FNC4 ASCII extensions disabled.
0x1UnconventionalGS1-128
Enables Vesta algorithm decoding for better read range.0x1Code128ReadingRange
A single character inserted before the barcode data to
indicate the symbology.
0x44Code128CodeMark
A single character inserted before the barcode data to
indicate the symbology.
0x44GS1-128CodeMark
Confidential: For informational use by Honeywell resellers and customers only
68 | Vocollect Talkman A700 Product Guide