Honeywell Vocollect Talkman A700 - Page 69

DescriptionDefault ValueRegistry Key
Enables verification of French CIP check digit.0x0Code128CheckDigitVerification
Enables verification of segment width, where 0 = disabled,
1 = medium tolerance, 2 = low lolerance.
0x0Code128ReadingTolerance
Length value L1. Range is 0x0 to 0xFF (0 to 255).0x0Code128BarCodeLengthL1
Length value L2. Range is 0x0 to 0xFF (0 to 255).0x0Code128BarCodeLengthL2
Length value L3. Range is 0x0 to 0xFF (0 to 255).0x0Code128BarCodeLengthL3
Length verification mode, where 0 = "L1 is min length", 1 =
"L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is max
length".
0x0Code128BarCodeLengthMode
Enables transmission of AIM identifier before the barcode
data. This is ignored if GTIN is active.
0x1GS1-128Identifier
Separator between multiple concatenated barcodes.0x1dCode128SeparatorCharacter
Multiple label concatenation, where 0 = disabled, 1 = only
concatenated, and 2 = concatenate if possible.
0x0Code128ConcatenationTransmission
Enables non-ISBT-compliant barcodes to be concatenated.0x0Code128Concatenation
Limits valid GS1-128 barcodes to GTIN (Global Trade Item
Number)-compliant format.
0x0GTINProcessingforGS1-128
User-defined symbology identifier. Range is 0-4 characters."B3"Code128UDSI
User-defined symbology identifier. Range is 0-4 characters."C9"GS1-128UDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Interleaved 2 of 5] - Interleaved 2 of 5 Symbology Configuration
Enables the Interleaved 2 of 5 symbology.0x0Interleaved2of5Activation
Enables Vesta algorithm decoding for better read range.0x1Interleaved2of5ReadingRange
A single character inserted before the barcode data to
indicate the symbology.
0x49Interleaved2of5CodeMark
Enables various check digit calculations, where 0 =
disabled, 1 = modulo 10 and 2 = French CIP HR.
0x0Interleaved2of5CheckDigitVerification
Tolerance for reading "hard to read" barcodes, where 0 =
high, 1 = medium, and 2 = low.
0x0Interleaved2of5ReadingTolerance
Length value L1. Range is 0x0 to 0xFF (0 to 255).0x6Interleaved2of5BarCodeLengthL1
Length value L2. Range is 0x0 to 0xFF (0 to 255).0x0Interleaved2of5BarCodeLengthL2
Length value L3. Range is 0x0 to 0xFF (0 to 255).0x0Interleaved2of5BarCodeLengthL3
Confidential: For informational use by Honeywell resellers and customers only
Talkman A730 Symbologies | 69