Honeywell Vocollect Talkman A700 - Page 70

DescriptionDefault ValueRegistry Key
Length verification mode, where 0 = "L1 is min length", 1 =
"L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is max
length".
0x0Interleaved2of5BarCodeLengthMode
Enable transmission of the check digit.0x0Interleaved2of5CheckDigitTransmission
User-defined symbology identifier. Range is 0-4 characters."B2"Interleaved2of5UDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Matrix 2 of 5] - Matrix 2 of 5 Symbology Configuration
Enables the MSI Code symbology.0x0Matrix2of5Activation
Enables special ChinaPost mode, where a specific start/stop
is required and the checksum is transmitted.
0x0Matrix2of5StartStop
A single character inserted before the barcode data to
indicate the symbology.
0x44Matrix2of5CodeMark
Length value L1. Range is 0x0 to 0xFF (0 to 255).0x6Matrix2of5BarCodeLengthL1
Length value L2. Range is 0x0 to 0xFF (0 to 255).0x0Matrix2of5BarCodeLengthL2
Length value L3. Range is 0x0 to 0xFF (0 to 255).0x0Matrix2of5BarCodeLengthL3
Length verification mode, where 0 = "L1 is min length", 1 =
"L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is max
length".
0x0Matrix2of5BarCodeLengthMode
User-defined symbology identifier. Range is 0-4 characters."B4"Matrix2of5UDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\MSI Code] - MSI Code Symbology Configuration
Enables the MSI Code (Modified Plessey) symbology.0x0MSIActivation
A single character inserted before the barcode data to
indicate the symbology.
0x44MSICodeMark
Enables various check digit calculations, where 1 = modulo
10 and 2 = double modulo 10.
0x1MSICheckDigitVerification
Length value L1. Range is 0x0 to 0xFF (0 to 255).0x6MSIBarCodeLengthL1
Length value L2. Range is 0x0 to 0xFF (0 to 255).0x0MSIBarCodeLengthL2
Length value L3. Range is 0x0 to 0xFF (0 to 255).0x0MSIBarCodeLengthL3
Length verification mode, where 0 = "L1 is min length", 1 =
"L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is max
length".
0x0MSIBarCodeLengthMode
Enable transmission of the check digit.0x1MSICheckDigitTransmission
User-defined symbology identifier. Range is 0-4 characters."B8"MSIUDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Plessey Code] - Plessey Code Symbology Configuration
Confidential: For informational use by Honeywell resellers and customers only
70 | Vocollect Talkman A700 Product Guide