Honeywell VOYAGER 1202G BF - Interfunction Delay; Intermessage Delay

6 - 6
Interfunction Delay
An interfunction delay of up to 327675 milliseconds (in 5ms increments) may be placed between the transmission of each
segment of the message string. Scan the following Interfunction Delay bar code, then scan the number of 5ms delays,
and the Save bar code using the Programming Chart inside the back cover of this manual.
To remove this delay, scan the Interfunction Delay bar code, then set the number of delays to 0. Scan the Save bar code
using the Programming Chart inside the back cover of this manual.
Intermessage Delay
An intermessage delay of up to 327675 milliseconds (in 5ms increments) may be placed between each scan transmission.
Scan the following Intermessage Delay bar code, then scan the number of 5ms delays, and the Save bar code using the
Programming Chart inside the back cover of this manual.
To remove this delay, scan the Intermessage Delay bar code, then set the number of delays to 0. Scan the Save bar code
using the Programming Chart inside the back cover of this manual.
Interfunction Delays
Prefix Scanned Data Suffix
1 2345STX HT CR LF
Interfunction Delay
2nd Scan Transmission1st Scan Transmission
Intermessage Delay
Intermessage Delay