1 - 1
1
Getting Started
About This Manual
This User’s Guide provides installation and programming instructions for the Voyager 1200g/1202g/1202g-BF linear scanner.
Product specifications, dimensions, warranty, and customer support information are also included.
Honeywell bar code scanners are factory programmed for the most common terminal and communications settings. If you need
to change these settings, programming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpacking Your Device
After you open the shipping carton containing the product, take the following steps:
• Check for damage during shipment. Report damage immediately to the carrier who delivered the carton.
• Make sure the items in the carton match your order.
• Save the shipping container for later storage or shipping.
Connecting the Device
Connecting with USB
A scanner or a base can be connected to the USB port of a computer.
Note: Charging the scanner through a USB port takes more time than direct AC adapter charging.
To Next Page
Loading...
