Honeywell VOYAGER 1202G BF - Base LED Sequences and Meaning; Base Power Communication Indicator; Reset Scanner

4 - 4
Base LED Sequences and Meaning
The base contains a red LED that indicate the status of the unit and verifies its communication with the host system. The
base also has a green LED that indicates the scanner instant charge pack charge condition. The red LED and the green
LED both flash when a link is established.
Base Power Communication Indicator
To display the power indicator on the base, scan the Base Power Communication Indicator On bar code. To turn off the
power indicator, scan the Off bar code. Default = On.
Reset Scanner
Scanning this bar code reboots the scanner and causes it to relink with the base.
Red LED - Host Communication
Red LED Condition
Off Power off, USB suspend
On continuously Power on, system idle
Short blinks. Occurs while transferring data to the host port. Receiving data
Green LED - Scanner Instant Charge Pack
Green LED Condition
Off Instant charge pack not detected or charge
suspended
Slow flash, 1 second on, 1 second off Charging instant charge pack near empty
Slow flash, 0.5 second on, 0.5 second off Charging instant charge pack near medium capacity
Slow flash, 0.25 second on, 0.25 second off Charging instant charge pack near full capacity
On continuously Charge complete
* Base Power Communication
Indicator On
Base Power Communication
Indicator Off
Reset Scanner