Honeywell VOYAGER 1202G BF - Page 196

11 - 24
Plessey Code Default All
Plessey Code Settings
PLSDFT 8-45
Off PLSENA0 8-45
*On PLSENA1 8-45
Plessey Check Char. *No Check Char. PLSCHK0 8-45
Validate, But Don’t
Transmit
PLSCHK1 8-45
Validate,
and Transmit
PLSCHK2 8-45
Plessey Redundancy Range (0 - 10) *0 PLSVOT## 8-46
Plessey Message Length Minimum (1 - 80) *3 PLSMIN## 8-46
Maximum (1 - 80) *80 PLSMAX## 8-46
GS1 DataBar Omnidirectional Default All
GS1 DataBar Omnidirectional Settings
RSSDFT 8-46
Off RSSENA0 8-46
*On RSSENA1 8-46
GS1 DataBar Omnidirectional
Redundancy
Range (0 - 10) *0 RSSVOT## 8-47
GS1 DataBar Limited Default All GS1 DataBar Limited Settings RSLDFT 8-47
Off RSLENA0 8-47
*On RSLENA1 8-47
GS1 DataBar Limited Redundancy Range (0 - 10) *0 RSLVOT## 8-47
GS1 DataBar Expanded Default All GS1 DataBar
Expanded Settings
RSEDFT 8-48
Off RSEENA0 8-48
*On RSEENA1 8-48
GS1 DataBar Expanded Redundancy Range (0 - 10) *0 RSEVOT## 8-48
GS1 DataBar Expanded Msg. Length Minimum (1 - 80) *3 RSEMIN## 8-48
Maximum (1 - 80) *80 RSEMAX## 8-48
Trioptic Code *Off TRIENA0 8-49
On TRIENA1 8-48
GS1 Emulation GS1-128 Emulation EANEMU1 8-49
GS1 DataBar Emulation EANEMU2 8-49
GS1 Code Expansion Off EANEMU3 8-49
EAN8 to EAN13 Conversion EANEMU4 8-49
*GS1 Emulation Off EANEMU0 8-49
Postal Codes
China Post (Hong Kong 2 of 5) Default All China Post (Hong Kong 2 of 5)
Settings
CPCDFT 8-50
*Off CPCENA0 8-50
On CPCENA1 8-50
China Post (Hong Kong 2 of 5)
Redundancy
Range (0 - 10) *0 CPCVOT## 8-50
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page