Honeywell XENON 1900 User Manual

ii
Datalogic™ Magellan
®
Aux Port Configuration ...........2-7
NCR Bioptic Aux Port Configuration............................2-8
Wincor Nixdorf Terminal Default Settings....................2-8
Wincor Nixdorf Beetle™ Terminal Default Settings.....2-8
Keyboard Country Layout............................................2-9
Keyboard Style ..........................................................2-19
Keyboard Conversion ................................................2-21
Control Character Output...........................................2-21
Keyboard Modifiers....................................................2-22
RS232 Modifiers ........................................................2-23
RS232 Baud Rate................................................2-23
RS232 Word Length: Data Bits, Stop Bits,
and Parity .......................................................2-25
RS232 Receiver Time-Out...................................2-26
RS232 Handshaking............................................2-27
RS232 Timeout....................................................2-28
XON/XOFF ..........................................................2-28
ACK/NAK .............................................................2-28
Scanner to Bioptic Communication............................2-29
Scanner-Bioptic Packet Mode .............................2-29
Scanner-Bioptic ACK/NAK Mode.........................2-30
Scanner-Bioptic ACK/NAK Timeout.....................2-30
Chapter 3 - Cordless System Operation
How the Cordless Charge Base/
Access Point Works ..................................................3-1
Linking the Scanner to a Charge Base........................3-1
Linking the Scanner to an Access Point ......................3-2
Communication Between the Cordless System
and the Host..............................................................3-2
Programming the Scanner and Base or Access
Point ..........................................................................3-3
RF (Radio Frequency) Module Operation....................3-3
System Conditions.......................................................3-4
Linking Process .....................................................3-4
Scanner Is Out of Range .......................................3-4

Honeywell XENON 1900 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Linear (1D) barcodes supported	-
Standard interfaces	USB, Keyboard wedge, RS-232, RS-485
Connectivity technology	Wired
Input voltage	4 - 5.5 V
Power consumption	450 mA
Power source type	DC
Power consumption (standby)	0.45 W
Power consumption (typical)	2.3 W
Shockproof	Yes
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	147 g