Honeywell XENON 1900 User Manual

iii
Scanner Is Moved Back Into Range...................... 3-4
Out of Range and Back into Range
with Batch Mode On......................................... 3-4
Page Button ................................................................ 3-5
About the Battery ........................................................ 3-5
Charging Information............................................. 3-5
Battery Recommendations.................................... 3-5
Proper Disposal of the Battery .............................. 3-6
Beeper and LED Sequences and Meaning................. 3-7
Scanner LED Sequences and Meaning ................ 3-8
Base/Access Point LED Sequences and
Meaning ........................................................... 3-8
Base Power Communication Indicator .................. 3-9
Reset Scanner ............................................................ 3-9
Scanning While in Base Cradle................................... 3-9
Paging ....................................................................... 3-10
Paging Mode ....................................................... 3-10
Paging Pitch ........................................................ 3-11
Error Indicators.......................................................... 3-11
Beeper Pitch - Base Error ................................... 3-11
Number of Beeps - Base Error............................ 3-11
Scanner Report ......................................................... 3-12
Scanner Address....................................................... 3-12
Base or Access Point Address.................................. 3-12
Scanner Modes ......................................................... 3-13
Charge Only Mode .............................................. 3-13
Linked Modes...................................................... 3-13
Unlinking the Scanner ............................................... 3-14
Override Locked Scanner.................................... 3-15
Out-of-Range Alarm .................................................. 3-15
Alarm Sound Type............................................... 3-15
Scanner Power Time-Out Timer ............................... 3-16
Flexible Power Management..................................... 3-18
Batch Mode ............................................................... 3-19
Batch Mode Beep................................................ 3-20
Batch Mode Storage............................................ 3-20
Batch Mode Quantity........................................... 3-21

Honeywell XENON 1900 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Linear (1D) barcodes supported	-
Standard interfaces	USB, Keyboard wedge, RS-232, RS-485
Connectivity technology	Wired
Input voltage	4 - 5.5 V
Power consumption	450 mA
Power source type	DC
Power consumption (standby)	0.45 W
Power consumption (typical)	2.3 W
Shockproof	Yes
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	147 g