204 Xenon XP User Guide
Data Matrix
< Default All Data Matrix Settings >
Data Matrix On/Off
Direct Part Marking Decoding
If you are having trouble reading Direct Part Marking (DPM) barcodes, scan
Dotpeen DPM Decoding for Dotpeen codes or scan Reflective (Etched) DPM
Decoding for reflective (etched) codes
. Default = Disable DPM Decoding.
* Uses Digimarc Decoder then
Both Decoders
Uses ID Decoder then
Alternates Decoders
Uses Digimarc Decoder then
Alternates Decoders
To Next Page
Loading...
