Honeywell Xenon XP 1952g - UPC-AEAN-13 with Extended Coupon Code

Xenon XP User Guide 173
UPC-A
<Default All UPC-A Settings>
UPC-A On/Off
Note: To convert UPC-A barcodes to EAN-13, see Convert UPC-A to EAN-13 on page 180.
UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not. Default = On.
Maximum Message Length
* On
Off
* On
Off