Xenon XP User Guide 189
setting the timeout (from 0-120 milliseconds) by scanning digits from the
Programming Chart, beginning on page 311 of this manual, then Save. Default =
500.
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
EAN/JAN-8 Addenda Separator
When this feature is On, there is a space between the data from the barcode and
the data from the addenda. When turned Off, there is no space. Default = On.
MSI
<Default All MSI Settings>
MSI On/Off
To Next Page
Loading...
