MAN0878-09-EN_XLE_XLT_UserManual
A u g u s t 2 3 , 2 0 1 8 P a g e 103 | 158
13.5 Alarms
Alarm presentation to the operator is highly configurable and beyond the scope of this
document to describe fully. The alarm object is generally used to enunciate alarms to the
operator.
For more information, refer to the Graphics Editor Help File in Cscape. This section presents a
typical configuration thereby providing an introductory description on what the operator
should expect.
To open the Alarm Configuration dialog, click on the Graphics Editor icon in the menu tool bar.
Then select Config → Alarm from the tool menu bar to open the Alarm Configuration dialog.
To Next Page
Loading...
