HORNER HE-XE1E2 - Pulse Width Measurement

MAN0878-09-EN_XLE_XLT_UserManual
A u g u s t 2 3 , 2 0 1 8 P a g e 85 | 158
12.2.3 Pulse Width Measurement
In Pulse Width Measurement mode, the high-speed input can measure the width or period of a
pulse stream in one of four modes and provides a continuous indication of the last sampled
value.
Width High 1μs Counts – In this sub-mode the accumulator value will contain the number
of 1μs counts the pulse is high.
Width Low 1μs Counts - In this sub-mode the accumulator value will contain the number
of 1μs counts the pulse is low.
Width High
Width Low