Plum A+
®
Infusion Systems
430-95597-001 (Rev. 06/05) 2- 11
Note A Note explains something new, gives
tips on performing an activity, or provides
a reminder of necessary preparations.
Override The clinician acknowledges an Alert,
confirms and proceeds with a program
containing a parameter that falls outside
the hospital-defined Soft Limits.
Parenteral Delivery via other than an intestinal route,
such as intravenous (IV) injection.
Patient Weight The Alternate Units Parameter whose
value entry is required with Dose rates
(quantity/time) having the third parameter
of weight, such as mcg/kg/min.
Piggyback
Delivery
Infusion will stop Line A and infuse Line
B until VTBI completes.
Piggyback Mode The Line B control selection mode that
requires Line A delivery suspension while
Line B delivers and then its resumption
when Line B VTBI completes. If Line A is
not programmed and started, Line B
delivery just stops when its VTBI
completes. Line A operation is delayed
for duration of its interruption by Line B.
Plunger Park
Position
The position of the pumping plunger that
allows the cassette to be withdrawn from
the Infuser without restriction, with an
opened Door.
POST Power On Self Tests. Startup initialization
and test of critical hardware modules and
software functions, to determine Infuser
readiness for its Intended Use.
Power On When the power is first applied to the
Infuser processor. It occurs when Infuser
is in the off condition and the AC power is
applied or during battery operation when
the ON/OFF key is pressed.
TERM DEFINITION
sec02.fm Page 11 Wednesday, June 8, 2005 8:18 AM
To Next Page
Loading...
