Plum A+
®
Infusion Systems
430-95597-001 (Rev. 06/05) 3- 9
2 Insert piercing pin into container outlet with
a twisting motion.
3 Fill Drip chamber to about 1/2 full or to the
score mark. Do not completely fill.
NOTE: To avoid getting Distal Air Alarms,
confirm the fluid bag is positioned higher than
the infuser. This should be set up prior to
priming the cassette.
Priming the Administration Set
1 Invert the cassette.
2 Turn the flow regulator counter-clockwise
until a drop of fluid is seen in the pumping
chamber.
3 Turn the cassette upright, then prime the
remainder of the administration set.
sec03.fm Page 9 Wednesday, June 8, 2005 8:19 AM
To Next Page
Loading...
