HOUNO CPE - MAKING TEMPERATURE ADJUSTMENTS; Adjusting Oven and Core Temperatures

SETTINGS ON THE TECHNICIAN MENU
40 SERVICE MANUAL
Making Temperature Adjustments
Use this function to adjust the oven or the core temperature osets. This is useful when
the temperature should correspond with the temperature of a 3rd party probe. The default
setting is 0.
Adjust the Oven Temperature
1. On the Technician display, touch Adjustments.
2. Touch Oven temp oset.
3. Slide your finger up or down to select the preferred oset. You can adjust the
temperature oset up or down by 10°C (50°F) in 1°C increments.
Adjust the Core Temperature
1. On the Technician display, touch Adjustments.
2. Touch Core temp oset.
3. Slide your finger up or down to select the preferred oset. You can adjust the
temperature by 1-degree increments
Adjust the sous vide temperature
1. On the Technician display, touch Adjustments.
2. Touch Core temp sous vide oset.
3. Slide your finger up or down to select the preferred oset. You can adjust the
temperature by 1-degree increments