HOUNO CPE - APPENDIX D: TOUCH CONTROLLER “XPE” SET-UP AND ADJUSTMENT; Converting Gas Oven to Another Gas Type

APPENDIX D: TOUCH CONTROLLER “XPE” – SET-UP AND ADJUSTMENT
82 SERVICE MANUAL
APPENDIX D:
TOUCH CONTROLLER
“XPE” – SET-UP AND
ADJUSTMENT
Converting A Gas Oven to Another Gas
Type
When you convert to another gas type, never adjust the oset governor “Minimum”.
1. Make the following adjustment on the “Max rpm” screw
• From G20 --> G25, 1 turn counter-clockwise.
• From G20 --> LGP, 2 turns clockwise
• From G25 --> G20, 1 turn clockwise.
• From G25 --> LGP, 3 turns clockwise.
• From LPG --> G20, 2 turns counter-clockwise.
• From LPG --> G25, 3 turns counter-clockwise.
2. Set up the controller for the new gas type.
3. Verify or change if necessary the preset rpm in the controller.
4. Perform flue gas analysis or adjustments. For more information, see the installation
manual.