HOUNO CPE - ERROR CODES; General Error Code List

ERROR CODES
50 SERVICE MANUAL
ERROR CODES
ERROR CODE DESCRIPTION
3 Generator too hot.
4 Oven too hot.
5 Fan too hot.
6 Drain too hot.
7 Oven sensor defective.
8 Core probe not connected.
9 Generator Sensor defect.
10 Drain sensor defective.
11 Water shortage.
12 SSR to hot.
13 Generator too hot.
14a Fan to slow.
14b Fan to slow.
16 I/O board to hot.
19 Internal error.
20 No communication.
21 Invalid recipe.
22 Program terminated.
23 Oven too hot.
24 Empty error.
25 ClimaOptima not calibrated.
26 ClimaOptima sensor.
27 ClimaOptima Calibration error.
28 Error in alarm.
29 Door sensor error.
34 Water pressure too low.
36 No detergent.
37 Cooldown error.
38 Detergent in oven.
39 Insucient memory.
40 I/O board too hot.