STANDARDS AND CODES
SERVICE MANUAL 7
STANDARDS AND CODES
U.S. and Canadian installations
The installation must conform with local codes, or in the absence of local codes,
with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or the Natural Gas and
Propane Installation/service Code, CSA B149.1, as applicable.
Installation/service must conform with local codes, or in the absence of local
codes, with the National Electrical Code, ANSI/NFPA 70-Latest Edition and/or
Canadian National Electric Code C22.1 as applicable.
Appliance is to be installed with backflow prevention in accordance with applicable
federal, province and local codes.
Australia and general export installations
Installation must conform with Local and National installation standards. Local
installation codes and/or requirements may vary. If you have any questions
regarding the proper installation, service, repair and/or operation of your HOUNÖ
oven, please contact your local distributor. If you do not have a local distributor,
please call the HOUNÖ Oven Company at +45 87 11 47 11.
To Next Page
Loading...
