HP 1910 Getting Started Guide

28
Figure 49 HyperTerminal window
6. On the Settings tab, set the emulation to VT100 and click OK.
Figure 50 Set terminal emulation in Switch Properties dialog box

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24