HP 1910 Getting Started Guide

42
Appendix B FRUs and compatibility matrixes
This appendix describes the FRUs available for the HP 1910 switches and their compatibility.
SFP transceiver modules and SFP Stacking Kit
NOTE:
• To guarantee the functionality of the SFP ports, use only HP SFP transceiver modules.
• The SFP transceiver modules available for this switch series are subject to chan
g
e over time. For the mos
t
up-to-date list of SFP transceiver modules, consult your HP sales representative or technical support
engineer.
• For the SFP transceiver module specifications, see
HP A-Series Switches Transceiver Modules User
Guide
.
Product
code
Module description
Central
wavelength
(nm)
Cable/fiber
diameter
(μm)
Multimode
fiber modal
bandwidth
(MHz × km)
Maximum
transmission
distance
JD118B
HP X120 1G SFP LC SX
Transceiver
850
50/125
500
550 m
(1804.46 ft)
400
500 m
(1640.42 ft)
62.5/125
200
275 m
(902.23 ft)
160
220 m
(721.78 ft)
JD119B
HP X120 1G SFP LC LX
Transceiver
1310
9/125 N/A
10 km (6.21
miles)
50/125 500, 400
550 m
(1804.46 ft)
62.5/125 500
550 m
(1804.46 ft)
JD061A
HP X125 1G SFP LC LH40
1310nm Transceiver
1310 9/125 N/A
40 km (24.86
miles)
JD062A
HP X120 1G SFP LC LH40
1550nm Transceiver
1550 9/125 N/A
40 km (24.86
miles)
JD063B
HP X125 1G SFP LC LH70
Transceiver
1550 9/125 N/A
70 km (43.50
miles)
JD098B
HP X120 1G SFP LC BX
10-U Transceiver
TX: 1310nm
RX: 1490nm
9/125 N/A
10 km (6.21
miles)
JD099B
HP X120 1G SFP LC BX
10-D Transceiver
TX: 1490nm
RX: 1310nm
9/125 N/A
10 km (6.21
miles)

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24