HP 1910 - Appendix C Ports and Leds; Ports; Console Port; 10;100;1000 Base-T Ethernet Port

44
Appendix C Ports and LEDs
Ports
Console port
Every HP 1910 switch provides one console port on the front panel.
Table 8 Console port specifications
Item S
p
ecification
Connector type RJ-45
Compliant standard EIA/TIA-232
Transmission baud rate 9600 bps (default) to 115200 bps
Service
• Provides connection to an ASCII terminal.
• Provides connection to the serial port of a local or remote
(through a pair of modems) PC running terminal emulation
program.
10/100/1000Base-T Ethernet port
Table 9 10/100/1000Base-T Ethernet port specifications
Item S
p
ecification
Connector type RJ-45
Interface standard
• 10 Mbps, half/full duplex
• 100 Mbps, half/full duplex
• 1000 Mbps, full duplex
• MDI/MDI-X, auto-sensing
Max transmission distance 100 m (328.08 ft)
Transmission medium Category-5 (or above) twisted pair cable
Standards IEEE 802.3i, 802.3u, 802.3ab
SFP port
All HP 1910 switches have 1000Base-X SFP ports. For the SFP transceiver modules available for the HP
1910 switches, see “SFP transceiver modules and SFP Stacking Kit.”