HP 1910 Getting Started Guide

40
Power specifications
Power input types
Chassis AC-in
p
ut
p
ower rece
p
tacle
RPS rece
p
tacle
All 1910 chassis but the
V1910-24G-PoE (365W)
1 N/A
V1910-24G-PoE (365W) 1 1
The RPS can supply power to your switch when the AC power line fails or cannot supply sufficient power.
AC input voltage specifications
Chassis Rated volta
g
e ran
g
e
Ma
x
volta
g
e ran
g
e
All chassis 100 VAC to 240 VAC, 50 Hz or 60 Hz 90 VAC to 264 VAC, 47 Hz to 63 Hz
RPS DC input voltage specifications and RPS compatibility
Chassis
RPS input rated voltage
ran
g
e
Compatible RPS
V1910-24G-PoE (365W) –52 VDC to –55 VDC A-RPS1600 (JG136A)
Power consumption specifications for non-PoE switches
Chassis
Minimum power
consum
p
tion
Maximum power consumption
1910-8G 8.7 W 14.4 W
V1910-16G 11.9 W 25.1 W
V1910-24G 13.4 W 31.5 W
V1910-48G 25.7 W 59.8 W
Power consumption specifications for PoE switches
Chassis
Maximum
PoE power
per port
Maximum
PoE ports at
full 30 W
out
p
ut
Total PoE
output
Minimum
power
consumptio
n
Maximum power
consumption
(including total PoE
out
p
ut)
1910-8G-PoE+
(180W)
30 W 6 180 W 19 W 230 W

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24