HP 200 G4 22

Table 5-1 Computer Setup—Main
Option Description
● Factory installed OS
● System log
Select to view logs.
● Build ID
● Feature byte
Computer Setup—Security
NOTE: Support for specic Computer Setup options can vary depending on the hardware conguration.
Table 5-2 Computer Setup—Security
Option Description
Administrator Password Lets you set and enable a BIOS administrator password, which prevents unauthorized access to the Setup
Utilities. Default is no password.
Power-On Password Lets you set and enable a power-on password, which prevents unauthorized computer system start
(boot). Default is no password.
Intel Software Guard
Extensions (SGX)
Lets you congure SGX. Default is S/W Controlled.
TPM Device Lets you set the Trusted Platform Module as Available or Hidden. If set to Hidden, the TPM device is not
visible to the operating system. If changed to Available, the TPM device becomes visible immediately
without a system restart. Default is Available.
TPM State Lets you enable or disable the TPM. The TPM State setting can change only if you conrm the request via
the Physical Presence Check prompted by BIOS during the next startup. Default is Enabled.
Clear TPM Set to Yes to reset the TPM to an unowned state. After the TPM is cleared, it is also turned o. To
temporarily suspend TPM operations, turn the TPM o instead of clearing it. Default is No.
IMPORTANT: Clearing the TPM resets it to factory defaults and turns it o. You lose all created keys and
data protected by those keys.
Restore security settings
to factory defaults.
Restores all security settings to factory defaults.
Computer Setup—Conguration
NOTE: Support for specic Computer Setup options can vary depending on the hardware conguration.
Table 5-3 Computer Setup—Conguration (for advanced users)
Option Heading
Language Lets you select the language of the menus in F10 Setup and the keyboard layout.
Virtualization
Technology
Lets you enable virtualization technology support. Default is eEnabled.
SATA Emulation Lets you congure SATA to either AHCI mode or RAID mode.
Computer Setup (F10) utilities 43