4. Rotate the top of the display over and place it next to the computer. Be careful not to accidentally
disconnect the display cables from the computer.
To install the display, reverse the removal procedure.
Memory
For a list of available memory modules, see Computer major components on page 4.
1. Prepare the computer for disassembly (Preparation for disassembly on page 16).
2. Remove the display (see Display on page 18).
3. Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle.
4. Grasp the edge of the memory module (2), and then gently pull the module out of the slot. Use the same
procedure to remove both memory modules.
IMPORTANT: To prevent damage to the memory module, hold the memory module by the edges only.
Do not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
Memory 19
To Next Page
Loading...
