Table 5-4 Computer Setup—Boot Options (continued)
Option Heading
To boot one time from a device other than the default device specied in Boot Order, restart the computer
and press Esc (to access the boot menu) and then F9 (Boot Order), or only F9 (skipping the boot menu)
when the monitor light turns green. After POST is completed, a list of bootable devices is displayed. Use
the arrow keys to select the preferred bootable device and press Enter. The computer then boots from the
selected non-default device for this one time.
Legacy Boot Order Species the order in which legacy boot sources are checked for a bootable operating system image.
Default is Internal Hard Drive.
IMPORTANT: UEFI boot sources always have precedence over legacy boot sources.
Computer Setup—Exit
NOTE: Support for specic Computer Setup options can vary depending on the hardware conguration.
Table 5-5 Computer Setup—Exit
Option Heading
Save Changes and Exit Saves changes to current system conguration, exits Computer Setup, and reboots.
Ignore Changes and Exit Exits Computer Setup without applying or saving any changes.
Load Setup Defaults Restores the factory system conguration settings as the default.
Computer Setup (F10) utilities 45
To Next Page
Loading...
