Need help?Do you have a question about the HP 2000i and is the answer not in the manual?
Target users for the storage system guide, including system administrators and technicians.
Required knowledge for installing and configuring the storage system, including servers, networks, and protocols.
List of other HP documents relevant to this product, such as installation and reference guides.
Explanation of text formatting, icons, and symbols used throughout the manual for clarity.
Information on how to contact HP for technical assistance and required details.
Information on where to find HP StorageWorks product warranty details on the website.
How to provide comments and suggestions regarding the product documentation.
High-level description of the storage solution's performance, reliability, flexibility, and manageability.
Identifies and describes the LEDs and indicators on the front of the 2312i G2 and 2324i G2 enclosures.
Identifies and describes the ports and connectors on the rear of the 2312i G2 and 2324i G2 enclosures.
Explanation of posted-write and read-ahead caching for faster data access.
How data in cache is saved to CompactFlash during power loss or controller failure.
Protection for RAID controller cache during power failure using super-capacitors and CompactFlash.
Step-by-step guide for installing enclosures and initially configuring the system.
Instructions for connecting controller enclosures to MSA2000 and MSA70 drive enclosures.
Procedure to verify that enclosures are powered on and connected correctly.
Methods for discovering and assigning IP addresses to management ports via DHCP or CLI.
Step-by-step guide for powering the storage system on and off, including order of operations.
Instructions for verifying and updating controller and enclosure firmware using SMU.
Describes the function and status of LEDs on the front panel of the enclosures.
Explains the LED indicators for disk drives and their various combinations.
Details the LEDs on the rear panel of the controller modules, including link and status indicators.
Explains the status indicators for the AC and DC power supply units.
Requirements and settings for web browsers used with the Storage Management Utility (SMU).
Step-by-step instructions for logging into the Storage Management Utility.
How to manually set or use NTP to configure the system's date and time.
Guide to using the wizard for initial system configuration, including network and services.
Guide to using the wizard for creating vdisks and mapping volumes to hosts.
Steps to verify that the initial configuration and host access are successful.
Basic steps and methodology for locating faults and identifying Field Replaceable Units (FRUs).
Troubleshooting steps if the storage enclosure fails to initialize upon power-on.
Step-by-step guide to diagnose faults based on LED status indications.
How to handle controller failure and cache status during such events.
Steps to troubleshoot and isolate connection issues between hosts and storage ports.
Actions to take when voltage or temperature warnings are reported by the system.
Describes the locations of various sensors monitoring system conditions.
Guidelines for installing the system in compliance with local safety codes.
Requirements for AC power supply, wiring, and circuit protection.
Guidance on safely lifting, placing, and securing enclosures.
Spacing and airflow requirements to prevent overheating and ensure proper cooling.
Site space, strength, and ventilation needs for installing enclosures.
Specifications for operating altitude, humidity, temperature, shock, and vibration.
Precautions to avoid damaging system components with static electricity discharge.
Various methods and tools for properly grounding electrostatic-sensitive parts.
FCC rules regarding RF emission limits and device classification (Class A/B).
FCC compliance statement and contact information for product inquiries.
Warnings and precautions regarding potential exposure to hazardous laser radiation.
Notices and compliance statements for various countries including Canada and EU.
Precautions and instructions for replacing internal batteries by authorized personnel.
Requirements for selecting and using appropriate power cords for the product.
General| Brand | HP |
|---|---|
| Model | 2000i |
| Category | Disk array system |
| Language | English |
To Next Page
