The PSA has a front panel password to prevent unauthorized front panel configuration. It also has a web administrator name
and password, which are required to configure the device or manage printers (the default user name is admin and the
default password is admin). Additional web administrator accounts can be added.
The existing user account information of the NT 4.0 domain (name and password) is used; users or groups of users can be
authorized to print through the PSA without requiring the creation of user accounts and passwords on the PSA.
For NT Domain networks, administrators can easily restrict print administration and services to specific groups or users. Valid
access levels are:
● Print (print, pause, and delete your own print jobs)
● Manage Documents (print, pause, and delete other user's print jobs)
● Full Control (print, pause, and delete other user's print jobs; delete printers; and change security settings using
native NT tools)
● No Access
Physical Specifications
Attribute Specification
Dimensions 441 millimeters (mm) (17.4 inches) W x 323 mm (12.7 inches) D x 63 mm (2.5
inches) H
Weight 4.6 kilograms (10.1 pounds)
Temperature Operating: +5 degrees Celsius (C) to +40 degrees C (41 degrees Fahrenheit (F)
to 104 degrees F)
Non-operating: -40 degrees C to +70 degrees C (-40 degrees F to 158 degrees F)
Network connection RJ-45
Serial port DB-9 (supports all APC uninterruptible power supplies with a Simple Signaling
cable (APC part # 940-0020B))
Acoustic noise 52 dB
Minimum Hard Drive 10 Gigabytes
Minimum Processor Speed 300 Megahertz
Recommended Number of Printers
Supported
50
Largest Spoolable File Size 2 Gigabytes
To Next Page
Loading...
Need help?
General
