Printer Driver Management
Links within this page:
Driver Name Mismatch
Security Warning When Adding New Drivers
Links to related pages:
System Messages for Driver Management
Printer drivers are factory-installed, or they might already be loaded from a previously-added printer. All printer
drivers added to the PSA are displayed on the Driver Management page. Drivers can also be initialized or deleted
on this page.
Note: Client-side rendering (CSR) drivers and Windows 2000 drivers can be initialized, enabled, and disabled
separately. However, these drivers are installed and deleted at the same time.
Note: Drivers for Microsoft Windows NT 4.0 usually work with both Windows 2000 and Windows XP. Consequently,
many vendors will label a driver as Windows 2000 or XP when the driver conforms to the NT 4.0 driver specification.
As a result, any of the following can occur.
● Windows 2000 drivers can show up as Windows NT or Windows 2000 drivers.
To Next Page
Loading...
