Category: Administrative
Description: The printer driver was successfully installed onto the PSA.
Initialized printer driver (501)
Level: Informational
Category: Administrative
Description: The printer driver was successfully initialized on the PSA and can now be
used for point and print.
Printer driver installation failed (502)
Level: Error
Category: Administrative
Description: The printer driver was not installed onto the PSA. One of the following
conditions exist:
● The user trying to install the printer driver has insufficient rights on the PSA or on
the PC.
In order to install drivers onto the PSA, a user must be logged onto the PC with a
user account that has permission to install software on that PC, and have a
corresponding administrator account on the PSA. If NT domain authentication is
enabled (in the web interface under Networking-->Microsoft Network Settings
page), administrator accounts on the PSA can be set up on the
Domain Account
page (in the web interface under Security-->Administrators). If NT domain
authentication is not enabled, the user must set up a
local administrator account on
the PSA, with a user name and password that matches the NT user account.
● There is a communication error with the PSA.
● There is a problem with the printer driver. Reasons might be:
❍ the INF file is an inappropriate format.
To Next Page
Loading...
