Backing Up, Restoring, Reseting, Rebooting, and
Upgrading the PSA
Links within this page:
Backing Up Network Settings and Printer Information
Restoring Network Settings and Printer Information (Using the Web Interface)
Resetting the PSA to Factory Defaults (Using the Front Panel)
Rebooting (or Restarting) the PSA
Upgrading the Firmware on the PSA
Links to related pages:
Troubleshooting the PSA
Related System Messages
Backing Up Network Settings and Printer Information
Saving the configuration parameters makes it easy to restore those parameters if the PSA must be replaced or if its
configuration values are accidentally changed or lost. Use the Backup page to save the following configuration
parameters:
● administrator account user names and passwords
● network settings
● printer information
● printer drivers
Use the following procedure to save the configuration parameters:
1. On the menu under Maintenance, select Backup.
2. Click to begin the process. A File Download window appears.
3. At the next screen, click Save This File to Disk and then click . A Save As dialog box appears.
4. Choose a file name, drive, and directory to hold the saved configuration.
5. Click . The saved configuration is in binary format and cannot be edited using a text editor.
To Next Page
Loading...
