Australia
New Zealand
ABG 8120-6810
Hong Kong SAR AB5 8120-0550
Supported Clients
Clients are networked PCs that submit print jobs to the PSA. The PSA can accept print jobs from the following clients:
● Windows 95
● Windows 98
● Windows NT 4.0
● Windows 2000
● Windows ME
● Windows XP
● Any RFC 1179-compliant LPD client including (not all LPD implementations are RFC 1179-compliant):
❍ HP-UX 10.x and above
❍ Solaris
❍ Linux
Note: The Microsoft Point and Print feature for Windows NT and Windows 2000 is only supported on an x86 PC.
The PSA provides easy, consistent PSA management for multiple PSAs simultaneously. An SNMP agent provides network
device information to monitor, configure, and control networked systems. It provides SNMP clients a method of
communicating with PSAs for administration over a network. Operations in SNMP are limited to retrieving and modifying
management information values and reporting events. SNMP v1, v2c, and v3 are supported for the 2.4.x firmware. An SNMP
MIB defining the PSA's SNMP interface is available from
www.hp.com or by contacting HP's support center.
Supported Printers
Any printer or print server that supports the LPD protocol should work with the PSA.
Supported Web Browsers
The following web browsers are supported:
● Netscape Navigator 6.0 or greater
● Microsoft (R) Internet Explorer 5.5 or greater
What Ships in the Box
The following are included in the box:
1. HP Print Server Appliance 4250 (J7941)
2. 3 Quick Start Posters (English/Spanish (5990-4778), French/German (5990-4779), and Italian/Portuguese (5990-
4780))
3. Documentation CD-ROM (5069-4434 for the CD and sleeve, and 5011-4598 for the CD)
4. Rackmount Kit (5069-4433)
5. Power cable
To Next Page
Loading...
Need help?
General
