Connection Status Valid statuses are
● Connected
● Cannot be contacted: The WINS server cannot be found. It does not
respond to a network query or ping.
● No entry: The WINS server automatically adds an entry for the PSA
onto the WINS server. If there is no entry for the PSA on the WINS
server, the WINS server is not functioning properly.
Domain Controllers
This section is displayed if Domain Authentication is enabled on the PSA. The values in this section are updated each time
status is gathered.
Parameter Description
Hostname Host name of the Domain Controller. This field is blank if there is no
DNS entry for a domain controller, or if the PSA cannot access any DNS
servers.
IP Address IP Address of the Domain Controller
Role Determined by the NetBIOS name from the WINS server. Valid statuses
are
● Primary: Primary Domain Controller.
● Backup: Backup Domain Controller.
● Unknown: Either the Domain Controller cannot be contacted,
or it is an Active Directory Domain Controller which means it is
a peer (and there are no primary or backup domain controllers)..
Connection Status Valid statuses are
● Connected
● Not configured: The PSA is in workgroup mode.
● Cannot be contacted: The domain controller cannot be found.
It does not respond to a network query or ping.
● No DNS entry for the Domain Controller: The IP address for
the domain controller on the DNS server is either not valid or
not for the domain controller.
● No WINS entry for the domain: The WINS server
automatically adds an entry for the PSA onto the domain
controller. If there is no entry for the PSA on the domain
controller, the WINS server is not functioning properly.
● Domain Controller not in the current domain: The domain
controller is a valid domain controller. However, it is not
associated with the same domain to which the PSA is currently
joined.
● There is no machine account for this PSA on the Domain
Controller: The machine account is not joined to the domain.
To Next Page
Loading...
Need help?
General
