HP 4250

SNMP Settings
Links within this page:
SNMP and the PSA
SNMP Traps
SNMPv3
Configuring SNMP Settings
Links to related pages:
Related System Messages
Troubleshooting the PSA
SNMP and the PSA
The SNMP agent supports MIB II (Management Information Base II), Host Resources MIB (portions), its own MIB,
called the HP-PRINT-SPOOLER-APPLIANCE-MIB, SNMPv3, and SNMPv2 Traps.
Note: For a copy of the HP-PRINT-SPOOLER-APPLIANCE-MIB, check http://www.hp.com.
SNMP Traps
Users can register for traps using the following, as outlined in RFC#2573:
● snmpTargetAddrTable
● snmpNotifyTable
● snmpTargetParamsTable
Registering for traps through the tables can be difficult; it is recommended that only administrators familiar with the
tables register for traps in this manner. A simple interface to the tables was added to the PSA's interface.
Registering for Traps
The SNMP Settings page is displayed when SNMP is selected (on the menu under Networking).