HP 4250

Application Error
There may be another instance of the HP Add
Driver Wizard running on this PC. Close down
all instances of the Add Driver Wizard, then try
running the Add Driver Wizard again.
There may be another instance of the HP Add Driver Wizard
running on this PC. Make sure there are no other instances of
the Add Driver Wizard running, then try running the Add Driver
Wizard again.
Application error:
This application experienced an error
error_description. Try running it again. If the
problem persists, consult the help file or the on-
line documentation. (Possible errors are listed
below.)
● Add printer driver failure
● Printer driver is not compatible with OS
● Insufficient memory
● Can't build driver info from *.inf file
● Initialization setup file queue failure
● Commit setup file queue failure
● Access denied
● Cannot find MFG
● File not found
● Server not found
● Driver not found
The application performing the driver installation and
initialization has experienced an error. This error may be
generated by a variety of problems from network
communication issues to .inf file corruption.
Verify the following:
● that the PSA network configuration information are
correct and running (for example, WINS server or
manually specified domain controller addresses), and
● the provided .inf files are valid printer setup information
files and that the correct operating system has been
associated with each .inf file.
Try using a different copy of the desired driver or a different
driver. If the problem persists, please
contact HP support.
Canceling. Please wait...
Informational.
Download Error: Add Driver Software
There may be another instance of the HP Add
Driver Wizard running on this PC or you may be
logged to this PC with insufficient privileges.
Make sure there are no other instances of the
Add Driver Wizard running and verify that you
are logged in to this PC with the appropriate
access privileges, then try running the Add
Driver Wizard again.
Self explanatory.
Driver could not be initialized:
This driver could not be initialized on the PSA,
so it has been disabled for automatic driver
download (for example, point and print).
Clients will have to supply their own driver.
Try adding this driver again. Add the version of
this driver that supports this PC's operating
system first. Then add drivers for additional
operating systems.
In order for drivers to be deployed to client machines via point
and print, the drivers must be properly initialized. If a driver has
failed to initialize it will be disabled by the PSA and cannot be
enabled (but it can be re-installed).
A disabled driver may still be associated with a printer, but when
a client tries to install that printer the driver files will not be
provided by the PSA and the user will be prompted to provide
the printer driver files.
Driver could not be initialized:
This PC has no FILE: port. A file port is required
to perform the necessary driver initialization.
Please re-install the file port on this PC before
adding more drivers to the PSA.
This driver could not be initialized on the PSA,
so it has been disabled for automatic driver
download (for example, point and print).
Clients will have to supply their own driver.
In order for driver initialization to run, a FILE: port must be
installed on your PC. Because the driver could not be initialized,
it has been disabled. Please reinstall the FILE: port and then
reinstall this driver.