Chapter 1 Performance Tests
HP 53131A/132A HP-IB Verification Program (Optional)
1-40 Assembly-Level Service Guide
1
HP 53131A/132A HP-IB Verification Program
(Optional)
The HP-IB Verification program exercises the HP 53131A/132A and
through various operating modes via the its HP-IB interface. If the
Counter successfully completes all phases of the verification program,
there is a high probability that the HP-IB interface is operating correctly.
If the Counter fails the verification program, refer to the troubleshooting
section in Chapter 2, “Service,” of this guide.
The HP-IB Verification program may be loaded into the HP 9000
series 200 or 300 Desktop Computer from the 3 1/2-inch disk
(HP P/N 53131-13501) or the 5 1/4-inch disk (HP P/N 53131-13502).
1 To run the program on the disk, insert the disk into the Desktop
Computer, load the program by typing Load “VER31”, and press
RUN key on the computer’s keyboard.
2 Follow the instructions displayed in the computer’s screen.
3 After running this program, record the result (Pass or Fail) on the
last page (page 1-46) of the HP 53131A/132A Performance Test
Record.
To Next Page
Loading...
Need help?
General
