Chapter 1 Performance Tests
HP 53181A HP-IB Verification Program (Optional)
1-70 Assembly-Level Service Guide
1
HP 53181A HP-IB Verification Program
(Optional)
The HP-IB Verification program exercises the HP 53181A through various
operating modes via the its HP-IB interface. If the Counter successfully
completes all phases of the verification program, there is a high
probability that the HP-IB interface is operating correctly. If the Counter
fails the verification program, refer to the troubleshooting section in
Chapter 2, “Service,” of this guide.
The HP-IB Verification program may be loaded into the HP 9000
series 200 or 300 Desktop Computer from the 3 1/2-inch disk
(HP P/N 53181-13501) or the 5 1/4-inch disk (HP P/N 53181-13501).
1 To run the program on the disk, insert the disk into the Desktop
Computer, load the program by typing Load “VER81”, and press
RUN key on the computer’s keyboard.
2 Follow the instructions displayed in the computer’s screen.
3 After running this program, record the result (Pass or Fail) on the
last page (page 1-74) of the HP 53181A Performance Test Record.
To Next Page
Loading...
Need help?
General
