279
In FIPS mode:
version tls1.0
undo version
Default
The SSL protocol version for an SSL client policy is TLS 1.0.
Views
SSL client policy view
Predefined user roles
network-admin
Parameters
ssl3.0: Specifies SSL 3.0.
tls1.0: Specifies TLS 1.0.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify the SSL version for SSL client policy policy1 as SSL 3.0.
<Sysname> system-view
[Sysname] ssl client-policy policy1
[Sysname-ssl-client-policy-policy1] version ssl3.0
Related commands
display ssl client-policy
To Next Page
Loading...
Need help?
General
