HP 5920

Examples
# Display RADIUS packet statistics.
<Sysname> display radius statistics
Auth. Acct. SessCtrl.
Request Packet: 0 0 0
Retry Packet: 0 0 -
Timeout Packet: 0 0 -
Access Challenge: 0 - -
Account Start: - 0 -
Account Update: - 0 -
Account Stop: - 0 -
Terminate Request: - - 0
Set Policy: - - 0
Packet With Response: 0 0 0
Packet Without Response: 0 0 -
Access Rejects: 0 - -
Dropped Packet: 0 0 0
Check Failures: 0 0 0
Table 5 Command output
Field Descri
p
tion
Auth. Authentication packets.
Acct. Accounting packets.
SessCtrl. Session-control packets.
Request Packet Number of request packets.
Retry Packet Number of retransmitted request packets.
Timeout Packet Number of request packets timed out.
Access Challenge Number of access challenge packets.
Account Start Number of start-accounting packets.
Account Update Number of accounting update packets.
Account Stop Number of stop-accounting packets.
Terminate Request Number of packets for logging off users forcibly.
Set Policy Number of packets for updating user authorization information.
Packet With Response Number of packets for which responses were received.
Packet Without Response Number of packets for which no responses were received.
Access Rejects Number of Access-Reject packets.
Dropped Packet Number of discarded packets.
Check Failures Number of packets with checksum errors.
Related commands
reset radius statistics
38