Output
a Sequence
of
Signals
3-9
Save and Recall
Your
Sequence
The
HP
8904A
will reset the contents
of
all of its Tone Registers to
their default settings when it exits the Tone Sequence Mode to return
to the Main Selection Level. When you set up your
own
signal
sequences, you can easily retain all
of
the parameters you have
entered by storing them in
a
Save Register. When you set up a Save
Register (as described in Chapter
1
of
this guide), the
HP
8904A
will
store all
of
the settings for all of its Tone Registers as well as all
of
its
other current operating conditions.
Remember
When you Recall a Save Register, the
HP
8904A
returns
all
of
its
operating modes
to
the same settings that existed when the Save
Register was selected.
This completes the Tone Sequence demonstration.
If
you wish to
try
setting up a different sequence order for the signals you have
configured, simply press the
LAST
key
to
return to the Sequence
String display and use the Insert and Delete Editing functions to
arrange the Tone Registers in whatever order you desire.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
