HP 9030 - Page 123

liD Backplane Pinout Data
Appendix
D
Figure 0-1 is a layout drawing of the computer 110 backplane. It identifies all 110 backplane
connectors and shows every pin and its corresponding signal name. Table 0-1 lists every I/O
backplane connector and its usage. Table 0-2 lists all the signal names used on the 110 backplane
and their definitions.
Table D-l. I/O Backplane Connectors
Designator
Connecting Assembly
PO
110 Card (Slot/Select Code 0)
PI
110 Card (Slot/Select Code 1)
P2
110 Card (Slot/Select Code 2)
P3
110 Card (Slot/Select Code 3)
P4
110 Card (Slot/Select Code 4)
P5
110 Card (Slot/Select Code 5)
P6
110 Card (Slot/Select Code 6)
J7
Motherboard (Connector PII)
P8
110 Door Interlock Switch
D-l