Installation
Note
HP 97060A
Graphics Processor
This note provides the necessary information for you to install the
HP
97060A Graphics Processor.
In
addition to the materials included with the HP 97060A, you need an
HP
27112A GPIO interface
card
and
cable option 001,
and
an RS-343-compatible monitor which accepts the sync pulse
on
the
green signal.
The HP
97060A Graphics Processor provides high resolution (1024 x
1024
pixels), rapid graphics
processing
and
a large variety of colors. The display format
is
1024
pixels horizontal by
768
pixels
vertical.
You can also attach an HP 9111A Data Tablet for graphics input.
Materials Supplied
Check that the following materials are included with your
HP
97060A.
Item
Quantity
HP 97060A Graphics Processor
1
Power Cord
1
Fast-Blow Fuses
4A
for 110V
1
6.3A for 220V
1
1.8 metre BNC cable
3
Installation Note 1
All
software for the Graphics Processor
is
included with the BASIC 3D Graphics software
and
with
the
HP-UX DGL Graphics software.
The Model
520
BASIC Graphics Programming Techniques manual explains how to use the
HP
97060A with the BASIC language system. The GRAPHICS/9000 Device Handler's manual ex-
plains how to use the
HP
97060A with HP-UX.
9706()-90002
E0584
First Edition, May 1984
Printed in U.S.A.
Fort Collins Systems
Division.
3404 East Harmony
Road.
Fort Collins, Colorado 80525
1
Flin-
HEWLETT
a:~
PACKARD
To Next Page
Loading...
