HP A-MSR20 Installation Guide

33
Removing a CF card
Caution:
Before removing a CF card, make sure that the CF card LED is not flashing.
Figure 36 Removing a CF card
1 2 3
To remove a CF card, as shown in Figure 36:
1. Press the ejector button once so that the eject button projects from the panel.
2. Press the ejector button again to eject the CF card part way out of the slot.
3. Remove the CF card and place it in an antistatic bag.

HP A-MSR20 Specifications

General

Brand	HP
Model	A-MSR20
Category	Network Router
Language	English