To Next Page

To Previous Page

Interface module, cable, and connection failure

When the LEDs on an interface module panel indicate abnormal operation:

1. Verify that the router supports the interface module.

2. Ensure that the interface module is installed in the correct slot and is configured correctly.

3. Verify that the interface cable is connected correctly.

Other manuals for HP A-MSR20

Questions and Answers:

Need help?

Do you have a question about the HP A-MSR20 and is the answer not in the manual?

General

Model	A-MSR20
Type	Router
Form Factor	Desktop
Connectivity Technology	Wired
Console Port	Yes
Operating System	Comware
Data Link Protocol	Ethernet, Fast Ethernet
Power Supply	External AC adapter
Network / Transport Protocol	TCP/IP, UDP
Routing Protocol	RIP, OSPF, BGP, Static Routing
Remote Management Protocol	Telnet, SSH, SNMP
Encryption Algorithm	DES, 3DES, AES
Features	Firewall, VPN, QoS, VLAN, NAT, DHCP
Operating Temperature	0 to 45°C
Storage Temperature	-40 to 70°C
Humidity	5% to 95% non-condensing
Ethernet Ports	4
Ports	4 x 10/100Base-TX, 1 x Console