HP A5120 EI Series

65
Appendix B FRUs and compatibility matrixes
This appendix describes the FRUs available for the A5120 EI and A5120 SI switches, and their
compatibility.
Interface cards (A5120 EI switches only)
The interface cards in this section are available for all A5120 EI switches except the A5120-24G EI and
A5120-48G EI switches.
Card
model
Product
code
Description
Support for IRF
Compatible transceiver
modules/cables
LSPM2GP2P
JD367A
Provides two Gbps
SFP fiber ports
No
See "GE SFP transceiver
modules."
NOTE:
The card does not support the
transceiver module coded
JD089B.
LSPM2SP2P
JD368B
Provides two 10
Gbps SFP+ fiber
ports
Yes
See "10-GE SFP+ transceiver
modules" and "SFP+ cables."
LSPM1XP2P
JD359B
Provides two 10
Gbps XFP fiber
ports
Yes
See "10-GE XFP transceiver
modules."
LSPM1XP1P
JD361B
Provides one 10
Gbps XFP fiber port
Yes
See "10-GE XFP transceiver
modules."
LSPM1CX2P
JD360B
Provides two 10
Gbps copper ports
Yes
See "CX4 cables."
NOTE:
For more information about the interface cards, see the user guides for the interface cards.
SFP/SFP+/XFP transceiver modules and SFP+/CX4
cables (A5120 EI switches only)
NOTE:
 To guarantee the functionality of the SFP/SFP+/XFP ports, use only HP transceiver modules.
 Transceiver modules availability for this switch series changes over time. For the most up-to-date list of
transceiver modules, consult your HP sales representative or technical support engineer.
 For the transceiver module specifications, see " HP A-Series Switches Transceiver Modules User Guide . "For
information about installing a transceiver module, see " Pluggable SFP/SFP+/XFP Transceiver Modules
Installation Guide ."